Specifications Sheet for Tractor Outlet Equipment

Home of the The Affordable Workhorse.

4 Wheel Drive Jinma Tractors.
Perfect for Small Farms, Orchards, Ranching, Nursery, Feedlots and multiple other uses.

Specifications Listing

**Specification Sheet for Jinma Tractors**
**All Specs shown in U.S. Measurements**
**Inches, Pounds, Miles Per Hour, Revolutions Per Minute, Pound/Force**
Model	JM204	JM254 / 284	JM354
Overall Dimensions LxWxH	104.9 48.6 51.1	117.7 50.7 56.6	123.8 57 80.7
Wheel Base Front to Rear	59.4/61.4	63.9/64.6	72.1
Wheel Width Front	37.4	41.3	47.2
Wheel Width Rear Adjustable	37.4/43.3	42/49.2	39.3/55
Ground Clearance	11.6	11.6	11.4
Tire Size Front	6x12	6x16	6x16
Tire Size Rear	8.3x24	9.5x24	11.2x24
Tractor Weight Unloaded	2646	2734	3395
Forward Speeds	.40 - 15	.40 - 15	1.1 -14.8
Reverse Speeds	.54 - 6.4	.54 - 6.4	1.4 -6.77
PTO Speeds	540/1000	540/1000	540/720
3 Point Hitch	Cat. 1	Cat. 1	Cat. 1
Hitch Lift Capacity	742	876	1113
Engine HP	20	25	35
Engine Type	3 Cyl. Vertical Water Cooled 4 Stroke Diesel	3 Cyl. Vertical Water Cooled 4 Stroke Diesel	4 Cyl. Vertical Water Cooled 4 Stroke Diesel
Clutch	Dual Stage	Dual Stage	Dual Stage
Manual Gearbox HI/LO + Creeper	3 Gear 12 Forward Speeds	3 Gear 12 Forward Speeds	4 Gear Hi/Lo No Creeper 8 Forward Speeds
Power Steering Standard	Yes - Cross Mounted	Yes - Cross Mounted	Yes - Cross Mounted
Brakes	Disc	Disc	Disc
Rated Traction Force (lb.f)	1417	1587	No Specs

Front Loader Specs:

Model: JM/ZL-20 for the JM204 and JM254 / 284

Bucket size: 50"
Bucket Capacity: 7.06 cubic feet
Maximum lift height: 98"
Clearance W/Bucket Dumped: 80"
Reach at Maximum Height: 16"
Maximum Dump Angle: 16 degree
Reach W/Bucket on Ground: 59"
Bucket Rollback: 17 degree
Digging Depth: 6"
Overall Height in Carry Position: 61"
Lift capacity to full height: 875 Lbs.
Breakaway Capacity: 2200 Lbs (load at which entire system will collapse)
Hydraulic Control Valve: Two Spool Selective Control Valve for Loader and Bucket Cylinders.
Lift Bucket and Cylinders: Double Acting
Bucket Control: Hydraulic Twin Cylinder
Bucket Cylinder Size (Twin) 2" Bore X 23" Stroke
Lift Cylinder Size: 2" Bore X 23" Stroke
Approximate Weight (Less Mounts) 597 Lbs
Raising Time: 6.5 Seconds
Lower Time: 5.0 Seconds
Bucket Dump Time: 5.0 Seconds
Bucket Rollback Time: 4.0 Seconds
Actual time sequence may vary with engine RPM

JM354 Front Loader Specs:

Model: JM/ZL-30

Bucket size: 60"
Bucket Capacity: 8.8 cubic feet
Maximum lift height: 98.5"
Clearance W/Bucket Dumped: 78"
Reach at Maximum Height: 26"
Maximum Dump Angle: 45 degree
Reach W/Bucket on Ground: 59"
Bucket Rollback: 16 degree
Digging Depth: 6.5"
Overall Height in Carry Position: 59"
Lift capacity to full height: 1050 Lbs.
Breakaway Capacity: 2640 Lbs

JM204 / 254 / 284 Length/Height Specs:
Front Loader Installed

Please note all measurements calculated at longest/widest/highest point.
Length w/loader: 158 inches
Width w/loader: 75 inches
Height w/loader raised: 87 to 98 inches depending on bucket tilt.

Model 6 PTO Driven Auto-Feed Wood Chipper
Manufactured by Yancheng Tractor Factory

Feed Opening: 24 Inches Square
Max Cutting Diameter: 6 Inches
Input Power Range: 18-50 HP
Gross Weight: 375 Kg.
Net Weight: 305 Kg.
Crate Dimentions: 230 X 80 X 71 cm
Flywheel Diameter: 60.5cm.
Flywheel Speed: 1220 RPM
PTO Speed: 540 RPM
Cutting Bar: 2 Blades 254 X 58 mm

Observations:

1) The manual supplied is almost useless. Poor quality printing, and pictures. Mostly consists of safety warnings. Everyone wishes there was a better book.

2) The belts supplied by the Chinese are fair. Plan on running them till they break and buying new American made "Gates" belts.

3) A second set of blades is recommended during the order proccess. They consist of a pair. $100.00

4) The manufactures ad claims, "We have designed and manufactured the chipper as simple as possible. We use common
bearings, belts, and pulleys." That is exactly what it is, Simple, Strong, and Dependable.

5) It will feed a 6" branch. It uses a flywheel cutter with two replacable/reversable knives. The shute is
24" wide and the gear feed is spring loaded with a 6 x 9 opening. It uses a heavy flywheel about 24 inches in diameter that requires a minimum 15 hp at the PTO.

6) Always use eye protection. There are some gaps near the flywheel that chips can and do find their way out and back at you. They can put out an eye. Check and maintain belt tension, particularly on the feed roller drive. If it is too loose the belt will slip and burn up when you put in anything sizeable. Too tight and you can break the feed roller drive shaft if you get a big piece of hardwood wedged in the feed. 15 lb or so for a 1/4 inch deflection at mid-point on the belt is about right. At that tension it will slip if you get jammed. Better to replace a belt than a drive shaft. Do not over-grease the bearings. They have rubber seals over the race, blow it out and they will attract dirt and or water very quickly.

**Click any underlined link below to continue - What do you need to know next?**
**This yellow link map appears near the bottom of every page.**
Tractor Models - Standard Equip.	Implements and Avail. Options	Tractor - Loader Specifications
Pricing - What is the Cost?	Backhoe - Details and Specs.	Common Questions w/ Answers
Parts and their Availability	Repair and Service Bulletins	Who Is - Contact Tractor Outlet
Warehouse Location Map	Warehouse Pickup Details	How to Place your Order
Remote Delivery - Off Warehouse	When your Tractor Arrives	Understanding 3 Points Hitches
Policies and Your Privacy	Tractors Made in America	Some Handy Jinma Hints
Great Links to Others	Why ours Cost Less	Large Picture Gallery

Tractors
541-745-0163
38544 Hwy 99W
Corvallis, OR 97330

HOMEPAGE